Xenon Lamp Aging Chamber DIN50021 Environment Test Chamber Climatic Chamber Manufacturer
Description:
This series chamber is to simulate and strengthen the natural climate influenced by solar radiation, temperature, humidity, condensation, rain and other major aging damage environmental factors, observation and analysis the change of material. The test chamber is for doing ground solar radiation test, to view the influence of equipment and components, the main features on simulation environment are the ground observed solar spectrum energy distribution and the strength of the composite absorbing energy with control temperature conditions.
It is mainly used in the nonmetallic materials, organic materials (paint, coating, rubber, plastic, etc.) in simulated climate aging test. And widely used in: rubber, plastic, paint, oil, chemical industry, automobile, textile and other industries.
Xenon lamp aging testing machine is a comprehensive climate testing machine, in addition to climatic aging test, the light fastness of materials can be carried out to test, polymer materials exposed at simulated sunlight. It simulates the light,temperature, rainfall, condensing, humidity to test the materials; it can be used for choosing new materials, improving existing materials, or assessment of change in material composition;It is divided into air-cooled 2.5kw and water-cooled 6.5kw with water-cooled machine.
Product Use and Some Industry Testing Standards
Lixian Brand Xenon lamp aging test chamber is dedicated to the analysis and testing of rubber, plastic, paint, paint and other chemical materials, the main services: performance testing, aging testing, composition analysis, formula research and development.This section is mainly to list some of the test standards for the test of various industries reference.
Unversal Standard
IEC 68-2-9, Basic Environmental Testing Procedures
ISO 4892-1, Plastics-Methods of exposure to laboratory light sources
ASTM G151,General Guidelines for Exposure of Nonmetallic Materials
ASTM G155, Xenon-Arc Test Apparatus for Exposure of Nonmetallic Materials
GB/T 16422.1
MAIN PARAMETER
| Item | Specification |
| Internal Dimension (W*D*H) | 800*800*800mm |
| External Dimension (W*D*H) | 1450*1350*2150mm |
| Inner chamber material | SUS 304 # Stainless Steel, Anti-rust, easy to clean |
| Outer chamber material | Stainless steel |
| Chamber Temperature | 40±3℃ |
| Temperature Uniformity | ≤3℃ |
| Blank panel temperature | 65±3℃ |
| Humidity Range | 50%-90% |
| Irradiated intensity | 0.35±0.02w/m²at 340nm |
| Xenon lamp power | 6.5KW water-cooled xenon lamp x 1pc |
| Control system | PLC controller, touch screen |
| Distance from specimen to arc center | 250~300mm, Effective exposure area 6400cm2 |
| Max. Sample dimension | 200*90mm Thickness<20mm |
| Filter | Daylight filter |
| Door seal | Silicone rubber seal |
| Temperature sensor | PT100 high precision temperature sensor |
| Air circulation system | Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity |
| Cooling ventilator | Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system |
| Cooling ventilator | France Tecumseh compressor |
| Power | AC380V, 50Hz, three phase |
| Safety Protection | Over heat protection for fan, Over load protection for cooling system, Over pressure protection for cooling system, Over temperature protection, Over heat and over flow protection for water pump, Leakage protection, Water shortage protection, Auto stop after failure warning |
Our company:
FAQ
1. How to choose the most suitable Mechanical Equipment ?
Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do andthe required specification.
2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15~20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.
3. Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines
according to your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
4. Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.
5. Do you have customers of our country before?
Now our testing machines have been sold to more than 80 countries, like USA, Canada, Russia,UK, Italy, Germany, European , India, Pakistan, Philippine, Singapore, Malaysia,Thailand , Vietnam, Korea,Saudi Arabia,Brazil...and so on.
Product Tags:
|
|
Xenon Lamp Aging Chamber DIN50021 Environment Test Chamber Climatic Chamber Manufacturer Images
|
